Fuel Dispensing Equipment Testing, Inspection and Certification

Fuel dispensing equipment expertise 

Over time, the oil and gas industry has seen many innovations. Whether your products are used at a drilling site, onshore, offshore, a refinery or service station, our experts can help you gain accelerated global market access through our knowledge of Canadian, IEC, ISO, EN and U.S. standards (ASTM, NGV, ANSI/CSA and UL Standards). Our expertise in this area uniquely positions us to help your products align with new and emerging regulations and industry best practices both critical factors in keeping people and sites safer. 

Our global network of technical experts and state-of-the-art facilities help manufacturers gain the compliance credentials they need to compete in today’s complex global supply chain. Leverage our global brand acceptance and trust to add value to your innovations. 

We perform product testing, inspection and certification for products powered by traditional and alternative fuels such as hydrogen. We test to all existing standards in order to assist customers in bringing safer products to market as quickly as possible. 

Flammable and combustible fluids equipment 

We will help you navigate regulations and standards, providing you with timely input on your project plans and facilitating a risk-free and cost-effective market entry for your products and systems.

As a global safety science leader, we leverage our long track record of understanding and solving gas and oil safety challenges. As a respected global conformity assessment provider for equipment associated with gasoline, fuel oils, CNG, (LP-G), oxy-fuel gases and solvents, we support manufacturers, users and inspection authorities with various gas and oil equipment needs.

We have the knowledge and expertise to evaluate, test and certify your gas and oil equipment following hundreds of U.S., Canadian, European and International Electrotechnical Commission (IEC) standards. We can also issue test reports and certificates for the IECEE (CB Scheme) and IECEx certificates of acceptance and conformity.

Hydrogen as an alternative fuel

The hydrogen economy is evolving at a faster pace than seen in previous decades. Among many drivers, there is a heightened societal demand for decarbonization which is resulting in new global governmental regulations, as well as government subsidies for research of the development of evolving hydrogen technologies across the value chain. Committed to our mission of making the world a safer place, we have been at the forefront of elevating the level of safety in emerging technologies, such as the hydrogen economy.

Value is added at every step in the hydrogen supply chain, which extends from renewable energy generation to production, storage, transportation and uses of hydrogen.

Our services will support you at each step of the supply chain, from research, training, testing of new materials, to the evaluation, inspection and certification of your new and innovative components, products and systems. 

In support of the hydrogen value chain, our services range from advisory, training, asset management, feasibility studies, environmental, social and governmental (ESG), functional safety, cybersecurity, hazardous locations, global market access, and regulatory assessment.

Relevant standards

UL Subject 2249 Outline of Investigation for Hydrogen Fuel Dispensing Systems

UL 87A Standard for Power-Operated Dispensing Devices for Gasoline and Gasoline/Ethanol Blends with Nominal Ethanol Concentrations up to 85 Percent (E0-E85)

UL 87B Outline of Investigation for Power-Operated Dispensing Devices for Diesel Fuel, Biodiesel Fuel, Diesel/Biodiesel Blends with Nominal Biodiesel Concentrations up to 20 Percent (B20), Kerosene, and Fuel Oil

UL 330A Outline of Investigation for Hose and Hose Assemblies for Use with Dispensing Devices Dispensing Gasoline and Gasoline/Ethanol Blends with Nominal Ethanol Concentrations up to 85 Percent (E0-E85)

UL 330B Standard for Hose and Hose Assemblies for Use with Dispensing Devices Dispensing Diesel Fuel, Biodiesel Fuel, Diesel/Biodiesel Blends with Nominal Biodiesel Concentrations up to 20 Percent (B20), Kerosene, and Fuel Oil

UL 428A Standard for Electrically Operated Valves for Gasoline and Gasoline/Ethanol Blends with Nominal Ethanol Concentrations up to 85 Percent (E0-E85) for products intended for use with gasoline or gasoline/ethanol blends with nominal ethanol concentrations up to 85 percent (E85)

UL 428B Standard for Electrically Operated Valves for Diesel Fuel, Biodiesel Fuel, Diesel/Biodiesel Blends with Nominal Biodiesel Concentrations up to 20 Percent (B20), Kerosene, and Fuel Oil

UL 567A Standard for Emergency Breakaway Fittings, Swivel Connectors and Pipe-Connection Fittings for Gasoline and Gasoline/Ethanol Blends with Nominal Ethanol Concentrations up to 85 Percent (E0-E85)

UL 567B Standard for Emergency Breakaway Fittings, Swivel Connectors and Pipe-Connection Fittings for Diesel Fuel, Biodiesel Fuel, Diesel/Biodiesel Blends with Nominal Biodiesel Concentrations up to 20 Percent (B20), Kerosene, and Fuel Oil

UL 842A Outline for Valves for Gasoline and Gasoline/Ethanol Blends with Nominal Ethanol Concentrations up to 85 Percent (E0 – E85)

UL 842B Outline of Investigation for Valves for Diesel Fuel, Biodiesel Fuel, Diesel/Biodiesel Blends with Nominal Biodiesel Concentrations up to 20 Percent (B20), Kerosene and Fuel Oil

UL 2586A Standard for Hose Nozzle Valves for Gasoline and Gasoline/Ethanol Blends with Nominal Ethanol Concentrations up to 85 Percent (E0 – E85)

UL 2586B Standard for Hose Nozzle Valves for Diesel Fuel, Biodiesel Fuel, Diesel/Biodiesel Blends with Nominal Biodiesel Concentrations up to 20 Percent (B20), Kerosene, and Fuel Oil

UL 331A Standard for Strainers for Gasoline and Gasoline/Ethanol Blends with Nominal Ethanol Concentrations up to 85 Percent (E0-E85)

UL 331B Standard for Strainers for Diesel Fuel, Biodiesel Fuel, Diesel/Biodiesel Blends with Nominal Biodiesel Concentrations up to 20 Percent (B20), Kerosene, and Fuel Oil

CSA/ANSI NGV4.1 Natural Gas Vehicle (NGV) Dispensing Systems

CSA/ANSI HGV4.1 Hydrogen Dispensing Systems