Earn Continuing Education Units with UL Solutions Knowledge Solutions

As a result of our Accredited Provider status, UL Solutions Knowledge Solutions is authorized to offer IACET Continuing Education Units (CEUs) for programs that qualify under the ANSI/IACET Standard. In obtaining this accreditation, UL Solutions Knowledge Solutions has demonstrated that it complies with the ANSI/IACET Standard which is recognized internationally as a standard of good practice.

Our Accredited Provider Status reflects our commitment to sound, effective training and is a testament to our skill in designing and developing training programs based on sound instructional design principles. We develop programs that are designed to help you improve your performance on the job. For more information about IACET and the CEU, visit www.iacet.org.

You may receive credit in the form of CEUs for designated UL Solutions Knowledge Solutions courses that you take. CEUs are used internationally to maintain records of completion for post-secondary education. For those on management or other professional career paths, CEUs are widely recognized as evidence of educational achievement.  Please verify applicability with your professional board before attending.

One CEU is granted for every 10 hours of interactive coursework. Successful completion of a UL Solutions Knowledge Solutions course shall depends on the satisfactory attendance, participation, and assessment.

Continuing Education Units

After successful completion of a IACET approved UL Solutions Knowledge Solutions instructor-led course, the participant will be awarded CEUs based on the values below:

Certificates of Completion

Participants who meet the criteria for successful completion of a UL Solutions Knowledge Solutions program that is approved for IACET CEUs will receive a Certificate of Completion that includes an IACET CEU badge.

Current Courses offering CEUs

Public Instructor Led Training – see chart above for CEU amounts

• An Overview of Power Distribution Equipment Standards: UL 891, UL 1558, and UL 1008
• Designing for Compliance to IEC 60601-1 3rd Edition
• Designing for Compliance to IEC 62368-1 3rd Edition                            
• Electrical Insulation Systems UL 1446
• Industrial Control Panels UL 508A and Short-Circuit Current Ratings
• Industrial Control Panels UL 508A and Short-Circuit Current Ratings & UL 698A 3rd Edition, Industrial Control Panels Relating to Hazardous (Classified) Locations - Bundled Workshop
• NFPA 780 and UL 96A Lightning Protection Installation Standard Review
• Measurement, Control and Laboratory Use Equipment: Designing for Compliance to IEC 61010-1 3rd Edition
• Plastics: Specifying and Evaluating Materials for Electrical, Electronic and Mechanical Applications
• UL’s Transition from UL 508C to UL 61800-5-1

Online Training

• Campus Fire & Life Safety Series
  • Fire, Safety, and Health Requirements for Spray-Finishing Operations
  • General Installation Requirements for Lightning Protection Systems
  • Inspection, Testing and Maintenance of Fire Door Assemblies
  • Inspection, Testing, and Maintenance of Standpipe and Hose Systems
• CAN/ULC S536-04: The Standard for Inspection and Testing of Fire Alarm Systems
• CAN/ULC S537: The Canadian Standard for Verification of Fire Alarm Systems
• Commodity Classification – A Critical Consideration in Automatic Fire Sprinkler System Design
• Dampers for Fire and Smoke Containment and Control eLearning 
• Designing for Compliance to IEC 60601-1 3rd. Edition eLearning
  • The Role of IEC 60601 Around the World 
  • Structure of IEC 60601 
  • General Overview and Philosophy of IEC 60601 
  • Scope of Standard & Equipment Classification 
  • Introduction to Risk Management 
  • Markings and Accompanying Documents 
• Designing for Compliance to IEC 62368-1 2nd Edition eLearning
  • Introduction to IEC 62368-1 
  • Clause 0 – Introduction to the Principles of Safety for IEC 62368-1 
  • Clause 4 – General Requirements 
• Extinguishing Systems Used for Special Hazard Fire Suppression: Overview (Module 1) 
• Extinguishing Systems Used for Special Hazard Fire Suppression: Testing and Evaluation (Module 2) 
• Fire Alarm Systems: UL Listing, Certification, Acceptance and Testing & Maintenance
• Fire Equipment Safety (Bundle): Inspection of Aerial Units 
• Pipes and Fittings for Use in Fire-Service Systems
• Testing and Certification of Commercial Roofing Products 
• Testing & Certification of Firefighting Foam & Foam Equipment
• Third-Party Certification Requirements for Unevaluated Electrical Equipment - Part 1 & Part 2 
• UL Certified Risk Professional (CRP) - Property Program 
• Valves for Fire Suppression Use in Fire-Service Systems 
• Water Mist Nozzles for Fire Protection Applications - An Understanding of Testing and Certification: eLearning

Please inquire about receiving CEUs for private workshops.

Assessment of Learning

Students who wish to obtain CEU credit for applicable UL Solutions Knowledge Solutions courses must demonstrate the appropriate level of learning as outlined in the learning objectives. The certified UL Solutions Knowledge Solutions Instructor is responsible for making assessment determinations. UL Solutions Knowledge Solutions most commonly uses the following assessment methods: instructor observation, group activities, end of course evaluations, attendance, and exams. The instructor should provide additional guidance at the beginning of the course on the specific assessment methods being used for the course. For online courses, assessments are provided within the module or after the course in the LMS.

Requests for Official Transcripts

To request and purchase an official transcript, please email ulknowledgesolutions@ul.com. If you would like to print an unofficial transcript, you can do so by logging in to the system and selecting Learning History.